Brand : Icom
Icom IC-A25CE VHF Airband Transceiver
Icom IC-A25CE VHF Airband Transceiver
Couldn't load pickup availability
Featuring 6 watts of output power, this stylish modern design,easy-to-use interface and large 2.3-inch LCD combine to provide stress-free programming and easy in-flight operation.
6 Watts High RF Output Power
For expanded communication coverage, output power has been increased to approximately 6 W typical (PEP) 1.8 W (carrier) compared to the IC-A24E (5/1.5 W (PEP/carrier)).
Easy-to-use Interface Often used functions are assigned to the ten-key pad and you can directly access the desired function. The enlarged flat sheet keypad offers smooth and swift operation.
2.3-inch Large High Visibility LCD
The large, high contrast and highly visible LCD display user-friendly, graphic screens and ensures good readability under sunlight. The operating frequency in large characters can be recognized at a glance. Also, the night mode option allows for easy viewing in low light conditions.
Specifications:
| General | IC-A25CE | |
| Frequency range | 118.000–136.992 MHz | |
| Number of memory channels | 300 channels/15 groups | |
| Channel spacing | 25/8.33 kHz | |
| Type of emission | 6K80A3E, 5K00A3E | |
| Power supply requirement | 7.2 V DC (BP-288), 11.0 V DC (External DC Jack) | |
| Current drain (approximately) | Tx High | Less than 1.8 A |
| RX Max. audio/Stand-by | Less than 500 mA/90 mA typ. (GPS, Bluetooth, Light: OFF) | |
| Antenna impedance | 50 Ω | |
| Operating temperature range | −20 °C to +55 °C | |
| Dimensions (W × H × D) (Projections not included) | 58.9 × 148.4 × 31.8 mm | |
| Weight (approximately) | 340 g (with BP-288) | |
| Transmitter | ||
| Output power (at 7.2 V DC) | 6.0/1.8 W (PEP/carrier) | |
| Audio harmonic distortion | Less than 10% (at 85% modulation) | |
| Harmonics Spurious emissions | Less than −36 dBm (except operationg frequency ±1 MHz) | |
| Frequency stability | ±1 ppm | |
| Receiver | ||
| Intermediate frequencies | 46.35 MHz/450 kHz (1st/2nd) | |
| Sensitivity | Less than 0 dBμ (with CCITT filter) | |
| Squelch sensitivity (at threshold) | Less than 0 dBμ | |
| Adjacent channel rejection | More than 60 dB | |
| Spurious response | More than 70 dB | |
| Hum and noise | More than 40 dB (at 90% modulation) | |
| Audio output power | External speaker | 530 mW typical (AM 8 Ω/60% Mod at 10% distortion) |
| Internal speaker | 1200 mW typical (AM 8 Ω/60% Mod at 10% distortion) | |
| Ext. speaker connector | 3-conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω | |
