ICOM IC-M710 HF SSB Radio with AT-130 Automatic Tuner Unit

The Icom IC-M710 HF SSB Radio Features:

• Covers all allowed bands between 1.6 and 27.5 MHz
• General coverage receiver
• Modes: SSB, RTTY, CW and AM
• 2182 kHz alarm built-in (optional for General versions)
• RF gain control
• Audio activated squelch
• Terminals for frequency/mode control via NMEA interfacing
• Direct keypad channel selection entry
• Large, front-mounted speaker
• Direct keypad channel selection entry
• Weather fax ready
• Backlight control
• CW full break-in and semi break-in
  

Icom IC-M710 HF SSB Radio Specifications:

• Frequency coverage: Receive - 0.500-29.999 MHz; Transmit - 1.6-27.5 MHz
• Mode (varies with country): J3E (USB), H3E, R3E, J2B (AFSK), F1B (FSK) R3E, A1A (CW)
• Number of channels: 1136 (max.) (160 programmable; 242 ITU SSB duplex; 72 ITU SSB simplex; 662 ITU FSK duplex)
• Antenna impedance: 50Ω (nominal)
• Usable temperature range: -30°C to +60°C; -22°F to +140°F
• Frequency stability: ±10 Hz (-30°C to +60°C: ±20 Hz above 15 MHz for General and Marine versions)
• Power supply requirement: 13.6 V DC ±15%
• Weight: 7.9 kg (17 lb 7 oz; negative ground type); 8.1 kg (17 lb 14 oz; floating ground type)
• Output power: U.S.A. version - 150, 60, 20 W PEP (selectable) (60, 20 W only for 25 MHz band); Europe version - 150, 60 W PEP (selectable) (60 W only for 25 MHz band)

Icom AT-130 Automatic Tuner Unit Features:

• Easy to setup
  
• Matches any frequency on every HF marine band
  
• Stores up to 45 frequencies
  
• Backs up the contents of your memory with its super capacitor
  
• Weather resistant
  
• Low tune-up power

Icom AT-130 Automatic Tuner Unit Specifications:

• Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
  
• Weight: 2.7 kg; 6.0 lb
  
• Usable Temperature Range: -30C ~ +60C
  
• Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
  
• Current Drain (at 13.6 V DC): 2 A
  
• Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
  
• Input Impedance: 50 ohms (unbalanced)
  
• Max. Input Power: 150 W (PEP)
  
• Input Power During Tuning: 10 W
  
• Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
  
• Auto Tuning Accuracy: VSWR 2.0:1
  
• Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)